Automatic type verification instrument
- Technical index
The total error of the whole process is less than 1 mu m (0.001 mm) within 10mm, no more than 2 mu m (0.002 mm) within 50mm, and no losing number, leading similar products to achieve international advanced level.
Speed is fast
It only takes 2 to 8 minutes to check all the time (including printing) of a watch. The automatic type is even faster.
Unique fixture design, convenient for loading card, covering a wide range (phi 8, phi 9.52, phi 28, etc.), a variety of free combination modes, convenient for all kinds of the card of the check list; The two sides of the lever check only need to be loaded once.
Functions are all the
Fully automatic, electric, semi-automatic three series of 20 kinds of models and dozens of optional accessories for you to choose, give you sufficient free choice space. Power load display, memory, independent power supply, special verification, direct print all kinds of test records and certificates and a variety of powerful functions such as digital readout interface, is fully guarantee to improve the verification work.
1. Special watch verification
Free throw all kinds of special type, such as: torsional spring table (comparator), end face cant lever table, fork lever table, table, funnel form, abnormity table, long head diameter measurement table (> 400 mm), long handle micrometer table (Φ 28 fixture), digital display table in a wide range and various special table class.
2. Digital display force
It is used in conjunction with DS series calibrators to measure the force values of various types of watches (percent, micrometer, internal diameter, leverage, micrometer, digital display, etc.). The resolution of the digital display force is 0.01 N, the range is 20N, allowing 5 times overload, arbitrary point zero, zero stability (4 hours drift is less than 1 resolution). Most notably, it can measure the force of a micrometer ratchet.
3. Power failure memory
Installed inside the DS series calibrator, memory can be 50 verification as a result, the power is not lost, repeatable callout, view, print, such as cooperate with computer interface can also record any memory contents upload PC, convenient apply to go to the factory check the verification authority.
DE software with powerful functions, printed on the printable three different kinds of verification conclusion, namely a page detailed conclusion a watch, a page four table general conclusion and a simple conclusion page eight tables; At the same time, you can print all kinds of verification certificate, calibration certificate, error curve and so on.
During the sampling process, the error hyperdifference alarm function can be set. For example, the return range error is set 5 micrometers. In the sampling process, as long as the return error exceeds 5 microns, the instrument will automatically alarm the alarm; May occur at the same time, leakage fault by mistake, such as when an error occurs, the machine of sound alarm, and the program no longer continue, to the operator self-correcting rear can continue next point sampling (turn the handwheel to correct the sampling position resampling).
6. Digital display interface
With DS series calibrator, it is convenient to check all kinds of digital displays, especially if the user is an electric instrument, and the digital display table interface can be automatically calibrating various digital display tables. The tedious operation of "0" is completely free from the number display table, so that the verification of the digital display table is fully automated. It takes only 1 minute to check a 10mm digital display, which can be used by users. It has interface with all major digital display table manufacturers, which is the most common type interface.
7. Precision floating table (patented product)
It is suitable for the verification of the spring internal diameter gauge and the steel ball internal diameter table, and it is tested on the first two way and the force of the head is the same as the original internal diameter gauge. In particular, the device can also be fitted with its mounting parts for the verification of the internal diameter gauge.