Introduction:

It serves to measure the Brinell hardness of ferrous metals, non-ferrous metals. Clear load weight. It adopts electronic automatic load system. It has ten steps of test force. Test range is more extensiver. Precision is higher.

Specification：

*Model:HB-3000E

*Brinell Scale:HBW2.5/62.5、HBW2.5/187.5、HBW5/125、HBW5/750、HBW10/100、HBW10/1500、HBW10/3000、HBW10/250、HBW10/500、HBW10/1000

*Total test force:62.5kgf(612.9N),100kgf(980.7N),125kgf(1226N),187.5kgf(1839N)、250kgf(2452N)、500kgf(4903N)、750kgf(7355N)、1000kgf(8907N)、1500kgf(14710N)、3000kgf(29420N)

*Be allowed to test the maximum height:220mm

*Hardness measuring area:0.005mm

*Test Force dwell time:5~60s

*Hardness measuring area:8~650HBW

*Magnification of microscope:20X

*Standards:EN, ISO 6507, EN ISO 6506, ASTM E-384, ASTM E-10-08, ASTM E-384 GB/T231.2，JJG150

*Max.depth of speciments:135mm

*Hardness output:Check Table

*Power:AC220+5%,50~60Hz

*Size(mm):550*236*750mm

*Weight:123kg

Standard Configuration:

*Hardness Block                                               3

*Ф2.5、5、10mmSteel ball indenters                Each one

*Certificate                                                       1

*Large,Medium and V-shaped Testing Table      Each one

*Fuse wire 2A                                                    3

*20xreadingmicroscope                                    1

*cable                                                               1

*Manual                                                           1