CDX III Magnetic Flaw Detector
Power supply: AC220V±10% 50HZSensitivity: show clear in A（15/100）standard test piece
Detection speed: more than 6 m/min
Test frequency: 2 seconds on, 2 seconds off.
Overall dimension: 300×140×200mm
Weight: the main engine is 9kg
- detailed
- Technical index
CDX-III Portable Magnetic Particle Flaw Detector
Overview：
CDX-III Portable Magnetic Particle Flaw Detector adopts the controlled silicon non-contacting switch, it is low noise, long lifetime and simple operation,suitable for on-site and laboratory use.
Function:
Mainly used to detect ferromagnetic workpiece surface and near surface crack, DC magnetization can detect the deep cracks. Drying or wetting detection is all applicable.
Industry Applications:
Boiler pressure vessel, steel structure, forging, casting, aviation standard parts, machining parts.
Main Engine Technical Parameters:
Power supply: AC220V±10%50HZ
Sensitivity: show clear in A（15/100）standard test piece
Detection speed: more than 6 m/min
Test frequency: 2 seconds on, 2 seconds off.
Overall dimension: 300×140×200mm
Weight: the main engine is 9kg
Probe Parameters:
TypeＤProbe | Lifting Power: AC≥5Kg DC≥18Kg （no joint） Pole Pitch: 50-200mm（adjustable） Working Current: ≥8Ａ Working Voltage: ＡＣ=38Ｖ、ＤＣ=9Ｖ Weight: 2.5Kg | TypeＡProbe | Lifting Power:ＡＣ≥4.5Ｋg ＤＣ≥18Ｋｇ Pole Pitch:20－160mm（adjustable） Working Voltage: ＡＣ=38Ｖ、ＤＣ=9Ｖ Weight: 2.0Kg |
TypeＯProbe | Center Magnetic Intensity: 180Ｏｅ Working Current:ＡＣ=38Ｖ Inner Diameter:150mm Weight:2.5Kg | TypeＥProbe | Lifting Power:≥12Kg Pole Pitch:110mm Working Current:≥7A Detection Speed：6 m/min Working Voltage: 38V﹡2 Weight: 3.0Kg |
Standard Configuration:
Main Engine 1
D Magnetic Yoke Probe 1
A Probe 1
O Probe 1
E Probe 1
Power Cord 1
Probe Line 1