thumb
thumb

CDX III Magnetic Flaw Detector

Power supply: AC220V±10% 50HZ
Sensitivity: show clear in A(15/100)standard test piece
Detection speed: more than 6 m/min
Test frequency: 2 seconds on, 2 seconds off.
Overall dimension: 300×140×200mm
Weight: the main engine is 9kg
  • detailed
  • Technical index

CDX-III Portable Magnetic Particle Flaw Detector

Overview

CDX-III Portable Magnetic Particle Flaw Detector adopts the controlled silicon non-contacting switch, it is low noise, long lifetime and simple operation,suitable for on-site and laboratory use.


Function:


Mainly used to detect ferromagnetic workpiece surface and near surface crack, DC magnetization can detect the deep cracks. Drying or wetting detection is all applicable.


Industry Applications:


Boiler pressure vessel, steel structure, forging, casting, aviation standard parts, machining parts.  


Main Engine Technical Parameters:

Power supply: AC220V±10%50HZ

Sensitivity: show clear in A15/100standard test piece

Detection speed: more than 6 m/min

Test frequency: 2 seconds on, 2 seconds off.

Overall dimension: 300×140×200mm

Weight: the main engine is 9kg


Probe Parameters:


TypeProbe

Lifting Power: AC5Kg  DC18Kg no joint) 

Pole Pitch: 50-200mmadjustable

Working Current: 8

Working Voltage: AC=38V、DC=9

Weight: 2.5Kg

TypeProbe

Lifting Power:AC≥4.5g  DC≥18Kg

Pole Pitch:20160mmadjustable

Working Voltage: AC=38V、DC=9

Weight: 2.0Kg

TypeProbe

Center Magnetic Intensity: 180Oe

Working Current:AC=38

Inner Diameter:150mm

Weight:2.5Kg

TypeProbe

Lifting Power:12Kg

Pole Pitch:110mm

Working Current:7A

Detection Speed6 m/min

Working Voltage: 38V2

Weight: 3.0Kg


Standard Configuration:


Main Engine   1

D Magnetic Yoke Probe   1

A Probe   1

O Probe   1

E Probe   1

Power Cord   1

Probe Line   1