934-1 Barcol Hardness TesterTesting Range：0~100HBa (25~150HBW)
Indenter 26° pan head cone, head face diameter 0.176mm
ndication Error：Hardness range 45~55HBa ±2HBa Hardness range 84~88HBa ±1HBa
Repeatability Error :Hardness range 45~55HBa ±2HBa Hardness range 84~88HBa ±1HBa
- Technical index
Standard Durometro Barcol Hardness TesterImpressor is an indentation hardness tester. The operation is easy, quick and almost non-destructive. The test is as simple as one press. It is a convenient tool for testing the hardness of aluminum, aluminum alloys and fiber reinforced plastics, which conforms to American Standard ASTM B648.
Standard Durometro Barcol Hardness Tester is mainly used to test the hardness of aluminum and aluminum alloys, to test the hardness of other soft metals and glass fibre reinforced plastic products. It can also be used to test the hardness of extra large, extra wide, extra thick work pieces, and to test the hardness of boards, belt materials, section materials, forgings and castings etc.
Standard Durometro Barcol Hardness Tester is commonly used as supplement of Webster Hardness Testers. It is usually used when test the hardness of pure aluminum, low hard aluminum alloys and extra large, extra thick materials.
* Standard Durometro Barcol Hardness Tester Impressor is a portable indentation hardness tester.
* Single hand operation, operating experience required can test any operating experience which is reachable in any site
*Wide valid testing range equivalent to Brinell hardness 25-150HBW, used to test the hardness of all kinds of aluminum from very soft aluminum to very hard alloys.
*Barcol Impressor has a wide range of application. Model 934-*can be used to test aluminum and aluminum alloys, copper and copper alloys, glass fiber reinforced plastics, rigid plastics, etc. The improved type can be used to test lead, tin and other soft metal, and flexible plastics, rubber, felt, leather, and so on.
*With 100 scales, our Barcol Impressor is of higher sensitivity than commonly used Webster hardness testers in aluminum alloy industry.
* It could finish the testing work on one side of the workpiece, without trouble of moving or supporting the workpiece. Due to this feature, the hardness tester can be used to test extra large, extra thick workpieces and assembly parts.
* By use of the conversion table, the test results can be easily converted to HB, HR, HV and HW.
*Standard Durometro Barcol Hardness Tester meets the requirement of ASTM B648-2000 standard.
*Testing Range :0~100HBa (25~150HBW)
*Indenter 26° pan head cone, head face diameter 0.176mm
*Indication Error：Hardness range 45~55HBa ±2HBa Hardness range 84~88HBa ±1HBa
*Repeatability Error :Hardness range 45~55HBa ±2HBa Hardness range 84~88HBa ±1HBa
*Standard testing block